>> Items in Cart: 0 view     >> Current Subtotal: $0.00   
AccountSearchProduct ListBasket ContentsCheckout
Engine Components
Engine Internals
Power Adders
Supercharger Pulleys /Pulley Systems
Reprogrammed PCM's
Camshafts/Valvetrain Components
Exhaust Systems/Headers
Air Induction
Cooling System/Fuel System
Transmission
Suspension and Braking
Interior/Exterior
Electronics/Batteries
Wheels/Tires
Performance Packages

Storefront >> Supercharger Pulleys /Pulley Systems >> QuickSwap Modular Pulley System


QuickSwap Modular Pulley System Price: $129.99
Quantity in Cart: none
View Shopping Cart
Continue Shopping
Checkout Now
APPLICATIONS:
- 1997-2003 Grand Prix GTP
- 2004-2006 Grand Prix GTP
- 2004-2005 Grand Prix GTP Comp G
- 1997-2004 Regal GS
- 1996-2003 Bonneville SSEi
- 2004-2005 Monte Carlo Supercharged SS
- 2004-2005 Impala SS

We proudly introduce the QuickSwap Modular Pulley System. This hub-pulley system is specifically designed for those enthusiasts that want to be able to adjust their boost levels in minutes. This system allows you to swap between different pulley sizes in less than 10 minutes.

The pulley hub is made from 303 stainless steel and gets pressed onto the supercharger snout once the stock supercharger pulley is removed (see Related Items for approved Pulley Puller Tool for removing and installing). Once the hub is on, you can quickly and easily bolt on the 6061 aluminum pulleys using the five 18-8 stainless hex screws(the hex key is included) that fit flush into the countersunk pulley holes. The results are a safe, more evenly-dispersed amount of torque on the pulley to keep it secure as it approaches upwards of 15,000rpm's on the smaller pulley sizes.

CNC engraved pulley size is put onto the underside of each pulley for easy distinction between sizes, but yet keeps the nice, clean look on the outside surface.



The QuickSwap Modular Pulley System is the lightest on the market with a 3.4” pulley weighing in at only 2.85 ounces, the hub with screws comes in at 2.6 ounces which makes the total system with a 3.4” pulley weigh in at just 5.45 ounces!

The QuickSwap Modular Pulley System includes one pulley size of your choice, and then you can add on below by checking additional pulley sizes for $59.99 each. The system also includes a hex wrench and 7 total hex screws (5 for installation and 2 extra).

IMPORTANT NOTES:
- For pulley sizes of 2.7" and smaller, the supercharger snout MUST be machined down to accept the pulley. DO NOT purchase 2.4"-2.7" pulleys if you do not have or will not be able to get your supercharger snout machined down.

- A specially-designed Hub Removal Backing Plate must be used if you ever decide to pull the hub off of the stock supercharger snout. You CANNOT pull off the hub with the pulley attached, as damage to the pulley, hub, and/or supercharger snout can result. A link to the Hub Removal Backing Plate is below.

Select Pulley Size for Modular System

Select Additional Pulley(s) Below:

 
3.8" (stock size)

 
3.7"

 
3.6"

 
3.5"

 
3.4"

 
3.3"

 
3.2"

 
3.1"

 
3.0"

 
2.9"

 
2.8"

 
2.7"

 
2.6"

 
2.5"

 
2.4"


Quantity:


Related Item(s)
Code Name Price   Qty.  
PULLER-RENT
Thrasher Supercharger Pulley Puller/Installation Tool for Rental $35.00
PULLER-BUY
Thrasher Supercharger Pulley Puller/Installation Tool for Purchase $124.99
GATORBACKS
Goodyear Gatorback Supercharger Belts $34.99
TEP-BACKING-PLATE
Thrasher Modular Hub Backing Plate $24.99
GATORBACKS_B
Goodyear Gatorback Supercharger Belts for Bonneville SSEi $29.99

Browse Other Products in this Category



Content and Graphics Copyright© 2001-2010, 3800 Performance. All Rights Reserved.
This site and the contents within may not be copied in part or whole without written consent from 3800 Performance.
All Third Party Names, Images and Trademarks may be the property of their respective holders.