MSP "Torque Buster" 
Polyurethane Upper Motor Mounts
Installation - Page 2

6.) Now that the stock bushing is removed, you can simply press the new poly bushing into the bracket.  

PLEASE NOTE: because the radiator bracket is made by a stamped-steel method, the tolerances on them vary quite a bit.  You may find it very easy to slide the new motor mounts into the brackets, whereas others may have to really press them in there.

7.) Your new poly bushing is now installed.  Reverse the first steps to reinstall the radiator bracket back above the radiator.  Install the dogbone, and tighten the two bolts.  Repeat all the above steps for the second bushing.

Here is your finished MSP "Torque Buster" Polyurethane Upper Motor Mount: